EL Clean PCB Cleaner

Approx. Rs 550 / PieceGet Latest Price

ELCLEAN is FLAMMABLE and all pre cautions for hazardous and flammable products should be taken while using the product. Usage and disposal of waste should be strictly in accordance with relevant government regulations. MSDS information will be provided on request.

• PACKING: 500 ml. AEROSOL PACKING
• BULK: 1 LTR., 5 LTR. AND 25 LTR. CONTAINERS.

Additional Information:

Approx. Rs 550 / PieceGet Latest Price

• 100% eco-Friendly 
• Easy to Apply, Fast Drying, Fast Curing
• Provides excellent adhesion to all sufaces.
• Easily Solder-able, thus components can be easily serviced
• Good dielectric strength, hence provides protection against high voltage ad corona shorts
• Contains UV tracer for inspection
• Rohs Compliances

•  This method is widely used for applying conformal coating to PCB assemblies. It is suitable only for our product, Conins Acrylcoat AR-30, Which is available in easy to use a Aerosol can.
• Hold the aerosol can in a slightly tilted position, at about 3 to 6 inches from the PCB assembly.
• Push the spray button on the can gently, to spray the aerosol. 
• Move your hand evenly and quickly, across the width or length of the PCB assembly, to spray single coat of aerosol. 
• Leave the component to dry in a well-ventilated area.

• Perform the spray coating under an exhaust hood or near open window. This pulls out fumes and fine mist from the aerosol. 

• This method is the easiest & most economical method for applying the conformal coatings. It is better suited for batch production & service applications. Brushing method ensures uniform application of coating and the thickness depends upon the application. Our products can be provided in cans. 
• Dip the application brush in the can.
• Apply the conformal coating evenly on the PCB assembly or component.
• Leave the component to dry in a well-ventilated area. 

• This method can be used when the quantity of PCB assemblies is more. Application can be done with the help of compressed air with 0.5 kg or 1 kg air pressure. Spraying can be done with help of a spray gun with adjustable spraying angles. By using this method, you can apply conformal coating of any viscosity to the component as per its needs.

• Dispensing Pump tank is available in 5L and 10L Capacity
• Dispensing Pump is available with easy o use Spray Gun
• Minimum wastage, More Coverage area.
• For Spraying, no Gas required, Spraying is done only using air, hance, it is safe to apply
• Eco-Friendly method as empty bottles need not be thrown away as waste. 

• 250 ml