LED Lighting Coating
Providing you the best range of 1l acrylcoat led-lgt-spl-60 led lighting coating with effective & timely delivery.
1L Acrylcoat LED-LGT-SPL-60 LED Lighting Coating
Request Callback
Applications:-
Removal:-
Storage:-
Precautions:-
₹ 1250 / Piece Get Latest Price
Product Brochure
| Packaging Size | 1L |
| Brand | Conins Pune |
| Packaging Type | Bottle |
| Usage/Application | To Protect The Board And Its Components From The Environment And Corrosion |
| Flash Point | Less than 0 DegreeC |
| Model No | LED-LGT-SPL-60 |
| Appearance | Clear And Transparent, Smooth & Glossy |
| Drying Time | Touch Dry Less Than 20 Minutes In Air Curing @ 60 Degree Celsius For 30 Minutes |
| Cure Time | 24 hours |
| Working Temp. | Minus 50 Degree Celsius To 1200 Degree Celsius |
| Di-electric strength | 25 kV/mm |
| CTI Value (Comparative Tracking Index) | 600 |
| Viscosity of Lacquer | 60 secs Zahn Cup G1 @ 30 Degree Celsius |
| Flammability | Self Extinguishing (Coating) Liquid Flammable |
| Insulation Resistance | 2.5 x 10 12 Ohm/cm |
| Dielectric Constant | 2.5 |
| Dissipation factor | 0.01 |
| Shelf Life | 12 Months |
Minimum order quantity: 50 Piece
Special Features:-
- 100% Ozone Friendly
- Economical in use
- Good Dielectric strength
- Excellent adhesion to all surfaces
- Easily Solderable, Servicing is easy.
- Prevents fungus growth
- Protects component leads from corrosion
- Contains UV Tracer for easy inspection
- Light Intensity will remain same after coating
Applications:-
- Clean the surface thoroughly before application. Pre- drying in a clean oven is recommended. Acrylcoat Lacquer can be applied by Brushing, Dipping or by Spraying. This can be used in a Dip Coating Machine or can be applied by a dispenser.
Removal:-
- The coating can be removed using Elvins Thinner AR.
Storage:-
- Store in a cool dry place below 40 Degree Celsius. Keep away from naked flame or flammable material. The contents are highly inflammable. Destroy the container after use.
Precautions:-
- Acrylcoat is a flammable material. Contact with skin or eyes and inhalation should be avoided. In case of contact: Skin: wash the affected areas with soap and plenty of water. Eyes: Wash with plenty of water. If irritation persists, get medical aid immediately. Keep away from open flames and Flammable material. Use in an adequately ventilated area only. Refer to our MSDS before using the product.
X
Product Videos
Contact Us
Ashish Vaidya (CEO)
Conins Pune
Ground, Gat No 146, Ghulani Industrial Estate, Mulshi Road, Pirangut, Behind Hotel Shreepad
Pune - 412115, Maharashtra, India
Send Email